open_source / modbus

#pragma once

/* Add this for macros that defined unix flavor */
#if (defined(__unix__) || defined(unix)) && !defined(USG)
#include <sys/param.h>
#endif

#include <stdint.h>

#define MODBUS_API

#define MODBUS_VERSION_STRING "1.0.0"

#ifdef  __cplusplus
#define MODBUS_BEGIN_DECLS  extern "C" {
#define MODBUS_END_DECLS }
#else
# define MODBUS_BEGIN_DECLS
# define MODBUS_END_DECLS
#endif

MODBUS_BEGIN_DECLS

#ifndef FALSE
#define FALSE 0
#endif

#ifndef TRUE
#define TRUE 1
#endif

#ifndef OFF
#define OFF 0
#endif

#ifndef ON
#define ON 1
#endif

/* Modbus function codes */
#define MODBUS_FC_READ_COILS                0x01
#define MODBUS_FC_READ_DISCRETE_INPUTS      0x02
#define MODBUS_FC_READ_HOLDING_REGISTERS    0x03
#define MODBUS_FC_READ_INPUT_REGISTERS      0x04
#define MODBUS_FC_WRITE_SINGLE_COIL         0x05
#define MODBUS_FC_WRITE_SINGLE_REGISTER     0x06
#define MODBUS_FC_READ_EXCEPTION_STATUS     0x07
#define MODBUS_FC_WRITE_MULTIPLE_COILS      0x0F
#define MODBUS_FC_WRITE_MULTIPLE_REGISTERS  0x10
#define MODBUS_FC_REPORT_SLAVE_ID           0x11
#define MODBUS_FC_MASK_WRITE_REGISTER       0x16
#define MODBUS_FC_WRITE_AND_READ_REGISTERS  0x17

#define MODBUS_BROADCAST_ADDRESS    0

/* Modbus_Application_Protocol_V1_1b.pdf (chapter 6 section 1 page 12)
 * Quantity of Coils to read (2 bytes): 1 to 2000 (0x7D0)
 * (chapter 6 section 11 page 29)
 * Quantity of Coils to write (2 bytes): 1 to 1968 (0x7B0)
 */
#define MODBUS_MAX_READ_BITS              2000
#define MODBUS_MAX_WRITE_BITS             1968

/* Modbus_Application_Protocol_V1_1b.pdf (chapter 6 section 3 page 15)
 * Quantity of Registers to read (2 bytes): 1 to 125 (0x7D)
 * (chapter 6 section 12 page 31)
 * Quantity of Registers to write (2 bytes) 1 to 123 (0x7B)
 * (chapter 6 section 17 page 38)
 * Quantity of Registers to write in R/W registers (2 bytes) 1 to 121 (0x79)
 */
#define MODBUS_MAX_READ_REGISTERS          125
#define MODBUS_MAX_WRITE_REGISTERS         123
#define MODBUS_MAX_WR_WRITE_REGISTERS      121
#define MODBUS_MAX_WR_READ_REGISTERS       125

/* The size of the MODBUS PDU is limited by the size constraint inherited from
 * the first MODBUS implementation on Serial Line network (max. RS485 ADU = 256
 * bytes). Therefore, MODBUS PDU for serial line communication = 256 - Server
 * address (1 byte) - CRC (2 bytes) = 253 bytes.
 */
#define MODBUS_MAX_PDU_LENGTH              253

/* Consequently:
 * - RTU MODBUS ADU = 253 bytes + Server address (1 byte) + CRC (2 bytes) = 256
 *   bytes.
 * - TCP MODBUS ADU = 253 bytes + MBAP (7 bytes) = 260 bytes.
 * so the maximum of both backend in 260 bytes. This size can used to allocate
 * an array of bytes to store responses and it will be compatible with the two
 * backends.
 */
#define MODBUS_MAX_ADU_LENGTH              260

/* Random number to avoid errno conflicts */
#define MODBUS_ENOBASE 112345678

/* Protocol exceptions */
enum {
    MODBUS_EXCEPTION_ILLEGAL_FUNCTION = 0x01,
    MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS,
    MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE,
    MODBUS_EXCEPTION_SLAVE_OR_SERVER_FAILURE,
    MODBUS_EXCEPTION_ACKNOWLEDGE,
    MODBUS_EXCEPTION_SLAVE_OR_SERVER_BUSY,
    MODBUS_EXCEPTION_NEGATIVE_ACKNOWLEDGE,
    MODBUS_EXCEPTION_MEMORY_PARITY,
    MODBUS_EXCEPTION_NOT_DEFINED,
    MODBUS_EXCEPTION_GATEWAY_PATH,
    MODBUS_EXCEPTION_GATEWAY_TARGET,
    MODBUS_EXCEPTION_MAX
};

#define EMBXILFUN  (MODBUS_ENOBASE + MODBUS_EXCEPTION_ILLEGAL_FUNCTION)
#define EMBXILADD  (MODBUS_ENOBASE + MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS)
#define EMBXILVAL  (MODBUS_ENOBASE + MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE)
#define EMBXSFAIL  (MODBUS_ENOBASE + MODBUS_EXCEPTION_SLAVE_OR_SERVER_FAILURE)
#define EMBXACK    (MODBUS_ENOBASE + MODBUS_EXCEPTION_ACKNOWLEDGE)
#define EMBXSBUSY  (MODBUS_ENOBASE + MODBUS_EXCEPTION_SLAVE_OR_SERVER_BUSY)
#define EMBXNACK   (MODBUS_ENOBASE + MODBUS_EXCEPTION_NEGATIVE_ACKNOWLEDGE)
#define EMBXMEMPAR (MODBUS_ENOBASE + MODBUS_EXCEPTION_MEMORY_PARITY)
#define EMBXGPATH  (MODBUS_ENOBASE + MODBUS_EXCEPTION_GATEWAY_PATH)
#define EMBXGTAR   (MODBUS_ENOBASE + MODBUS_EXCEPTION_GATEWAY_TARGET)

/* Native libmodbus error codes */
#define EMBBADCRC  (EMBXGTAR + 1)
#define EMBBADDATA (EMBXGTAR + 2)
#define EMBBADEXC  (EMBXGTAR + 3)
#define EMBUNKEXC  (EMBXGTAR + 4)
#define EMBMDATA   (EMBXGTAR + 5)
#define EMBBADSLAVE (EMBXGTAR + 6)

typedef struct _modbus modbus_t;

typedef struct {
    int nb_bits;
    int start_bits;
    int nb_input_bits;
    int start_input_bits;
    int nb_input_registers;
    int start_input_registers;
    int nb_registers;
    int start_registers;
    uint8_t *tab_bits;
    uint8_t *tab_input_bits;
    uint16_t *tab_input_registers;
    uint16_t *tab_registers;
} modbus_mapping_t;

typedef enum
{
    MODBUS_ERROR_RECOVERY_NONE          = 0,
    MODBUS_ERROR_RECOVERY_LINK          = (1<<1),
    MODBUS_ERROR_RECOVERY_PROTOCOL      = (1<<2)
} modbus_error_recovery_mode;

MODBUS_API int modbus_set_slave(modbus_t* ctx, int slave);
MODBUS_API int modbus_set_error_recovery(modbus_t *ctx, modbus_error_recovery_mode error_recovery);
MODBUS_API int modbus_set_socket(modbus_t *ctx, int s);
MODBUS_API int modbus_get_socket(modbus_t *ctx);

MODBUS_API int modbus_get_response_timeout(modbus_t *ctx, uint32_t *to_sec, uint32_t *to_usec);
MODBUS_API int modbus_set_response_timeout(modbus_t *ctx, uint32_t to_sec, uint32_t to_usec);

MODBUS_API int modbus_get_byte_timeout(modbus_t *ctx, uint32_t *to_sec, uint32_t *to_usec);
MODBUS_API int modbus_set_byte_timeout(modbus_t *ctx, uint32_t to_sec, uint32_t to_usec);

MODBUS_API int modbus_get_header_length(modbus_t *ctx);

MODBUS_API int modbus_connect(modbus_t *ctx);
MODBUS_API void modbus_close(modbus_t *ctx);

MODBUS_API void modbus_free(modbus_t *ctx);

MODBUS_API int modbus_flush(modbus_t *ctx);
MODBUS_API int modbus_set_debug(modbus_t *ctx, int flag);

MODBUS_API const char *modbus_strerror(int errnum);

MODBUS_API int modbus_read_bits(modbus_t *ctx, int addr, int nb, uint8_t *dest);
MODBUS_API int modbus_read_input_bits(modbus_t *ctx, int addr, int nb, uint8_t *dest);
MODBUS_API int modbus_read_registers(modbus_t *ctx, int addr, int nb, uint16_t *dest);
MODBUS_API int modbus_read_input_registers(modbus_t *ctx, int addr, int nb, uint16_t *dest);
MODBUS_API int modbus_write_bit(modbus_t *ctx, int coil_addr, int status);
MODBUS_API int modbus_write_register(modbus_t *ctx, int reg_addr, int value);
MODBUS_API int modbus_write_bits(modbus_t *ctx, int addr, int nb, const uint8_t *data);
MODBUS_API int modbus_write_registers(modbus_t *ctx, int addr, int nb, const uint16_t *data);
MODBUS_API int modbus_mask_write_register(modbus_t *ctx, int addr, uint16_t and_mask, uint16_t or_mask);
MODBUS_API int modbus_write_and_read_registers(modbus_t *ctx, int write_addr, int write_nb,const uint16_t *src, int read_addr, int read_nb,uint16_t *dest);
MODBUS_API int modbus_report_slave_id(modbus_t *ctx, int max_dest, uint8_t *dest);

MODBUS_API modbus_mapping_t* modbus_mapping_new_start_address
(
    unsigned int start_bits, unsigned int nb_bits,
    unsigned int start_input_bits, unsigned int nb_input_bits,
    unsigned int start_registers, unsigned int nb_registers,
    unsigned int start_input_registers, unsigned int nb_input_registers
);

MODBUS_API modbus_mapping_t* modbus_mapping_new(int nb_bits, int nb_input_bits, int nb_registers, int nb_input_registers);
MODBUS_API void modbus_mapping_free(modbus_mapping_t *mb_mapping);

MODBUS_API int modbus_send_raw_request(modbus_t *ctx, uint8_t *raw_req, int raw_req_length);

MODBUS_API int modbus_receive(modbus_t *ctx, uint8_t *req);

MODBUS_API int modbus_receive_confirmation(modbus_t *ctx, uint8_t *rsp);

MODBUS_API int modbus_reply(modbus_t *ctx, const uint8_t *req, int req_length, modbus_mapping_t *mb_mapping);
MODBUS_API int modbus_reply_exception(modbus_t *ctx, const uint8_t *req, unsigned int exception_code);

/**
 * UTILS FUNCTIONS
 **/

#define MODBUS_GET_HIGH_BYTE(data) (((data) >> 8) & 0xFF)
#define MODBUS_GET_LOW_BYTE(data) ((data) & 0xFF)
#define MODBUS_GET_INT64_FROM_INT16(tab_int16, index) \
    (((int64_t)tab_int16[(index)    ] << 48) + \
     ((int64_t)tab_int16[(index) + 1] << 32) + \
     ((int64_t)tab_int16[(index) + 2] << 16) + \
      (int64_t)tab_int16[(index) + 3])
#define MODBUS_GET_INT32_FROM_INT16(tab_int16, index) ((tab_int16[(index)] << 16) + tab_int16[(index) + 1])
#define MODBUS_GET_INT16_FROM_INT8(tab_int8, index) ((tab_int8[(index)] << 8) + tab_int8[(index) + 1])
#define MODBUS_SET_INT16_TO_INT8(tab_int8, index, value) \
    do { \
        tab_int8[(index)] = (value) >> 8;  \
        tab_int8[(index) + 1] = (value) & 0xFF; \
    } while (0)
#define MODBUS_SET_INT32_TO_INT16(tab_int16, index, value) \
    do { \
        tab_int16[(index)    ] = (value) >> 16; \
        tab_int16[(index) + 1] = (value); \
    } while (0)
#define MODBUS_SET_INT64_TO_INT16(tab_int16, index, value) \
    do { \
        tab_int16[(index)    ] = (value) >> 48; \
        tab_int16[(index) + 1] = (value) >> 32; \
        tab_int16[(index) + 2] = (value) >> 16; \
        tab_int16[(index) + 3] = (value); \
    } while (0)

MODBUS_API void modbus_set_bits_from_byte(uint8_t *dest, int idx, const uint8_t value);
MODBUS_API void modbus_set_bits_from_bytes(uint8_t *dest, int idx, unsigned int nb_bits,
                                       const uint8_t *tab_byte);
MODBUS_API uint8_t modbus_get_byte_from_bits(const uint8_t *src, int idx, unsigned int nb_bits);
MODBUS_API float modbus_get_float(const uint16_t *src);
MODBUS_API float modbus_get_float_abcd(const uint16_t *src);
MODBUS_API float modbus_get_float_dcba(const uint16_t *src);
MODBUS_API float modbus_get_float_badc(const uint16_t *src);
MODBUS_API float modbus_get_float_cdab(const uint16_t *src);

MODBUS_API void modbus_set_float(float f, uint16_t *dest);
MODBUS_API void modbus_set_float_abcd(float f, uint16_t *dest);
MODBUS_API void modbus_set_float_dcba(float f, uint16_t *dest);
MODBUS_API void modbus_set_float_badc(float f, uint16_t *dest);
MODBUS_API void modbus_set_float_cdab(float f, uint16_t *dest);

#include "modbus-tcp.h"
#include "modbus-rtu.h"

MODBUS_END_DECLS